SYNCHRONOUS_REQUEST_RESPONSE

All the reverse entity references for this entity

Provides access to 4D-Trajectory meteorological data.

Operations

Provides the consumer with Flight Trajectory points for the globe

Idempotent
IDEMPOTENT
Synchronous
SYNCHRONOUS
Precondition
Must be authenticated and authorised
TI Protocol Methods
HTTP GET
Operation Message
Processing Consideration

https://gateway.api-management.metoffice.cloud/ads4dt/1.0/collections/{collection name}/instances/latest/trajectory?coords=LINESTRINGGZM({X Y Z T, X Y Z T,....X Y Z T})&parameter-name={diagnostic name..., diagnostic name...}

  • 'X Y Z T' refers to longitude, latitude, vertical level (hPa or feet in exact Flight Levels) and date/time
  • 'diagnostic name' refers to the weather parameter or parameters
Addressable Resource
Behaviour
Interface Binding Description

SWIM Yellow Profile Compliant WS Lite enables HTTPS GET requests and associated responses. The interface shall return .covjson files.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

Provides access to Pan European Blended Turbulence data.

For gridded Grib2 data, could be a single tile covering the entire Pan Europe domain or a tile for a pre-defined spatial sub set of this domain.

For non-operational polygonal data in .geojson the user will specify severity level in the request (severity 1, 2 or 3)

Operations

Provides the consumer with the latest Pan European Turbulence Data

Idempotent
IDEMPOTENT
Synchronous
SYNCHRONOUS
Precondition
No preconditions identified.
TI Protocol Methods
HTTP GET
Operation Message
Processing Consideration

This endpoint will return a Grib2 payload of Turbulence severity for a pre-defined spatial sub set of the Pan European area.

The end user will replace (id) with the name of the sub set: uk-ireland-fab, fab-ec,  dk-se-ne-fab, danube-fab, fab-ce, baltic-fab, blue-med-fab, sw-fab, manchester-tma, scotland-tma

Behaviour
Interface Binding Description

HTTP GET requests and associated responses. The interface shall return compressed (zip) files.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

Provides access to Pan European 3D RADAR data.

Operations

Provides the consumer with the latest Pan European 3D RADAR Data

Idempotent
IDEMPOTENT
Synchronous
SYNCHRONOUS
Precondition
No preconditions identified.
TI Protocol Methods
HTTP GET
Operation Message
Processing Consideration
Behaviour
Interface Binding Description

HTTP GET requests requests and associated responses. The interface shall return compressed (zip) files.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

Provides access to Pan European 3D RADAR data in Feet and in Grib2 format

Operations

Provides the consumer with the latest Pan European 3D RADAR Data

Idempotent
IDEMPOTENT
Synchronous
SYNCHRONOUS
Precondition
No preconditions identified.
TI Protocol Methods
HTTP GET
Operation Message
Processing Consideration

This endpoint will return High resolution 1km Radar at 5 minute intervals in Grib2 format in feet. Note that the user must set the API key into the url at place Token. It is deemed a candidate service as the Grib2 output has not been fully quality assured by any parties outside the Met Office.

A candidate service to request and obtain a payload of Low resolution Radar data in Grib2 format in feet at 2KM resolution in 15 minute intervals.

Deemed a candidate service as the Grib2 format payload has not yet been validated by any parties outside of the Met Office.

Behaviour
Interface Binding Description

HTTP GET requests requests and associated responses. The interface shall return compressed (zip) files.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

The complete API description is available on MetSafe user portal accessible through a Token.  An access Token can be requested at [email protected].

Operations

Description of the service capabilities and data available.

 

 

Idempotent
IDEMPOTENT
Synchronous
ASYNCHRONOUS
TI Protocol Methods
Request/reply
Operation Message
Processing Consideration
Behaviour
Interface Binding Description

WeatherProfile is a tailored HTTP request/reply webservice.
GET and POST requests are used.
Replies are provided in JSON/GEOJSON format.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

The following section describes details how to subscribe and unsubscribe to this service.

Operations

At the moment subscribing or unsubscribing to this service is only possible by contacting the DWD Aviation Customer Service. Contact details are found in the general part of the service description.

Idempotent
NON_IDEMPOTENT
Synchronous
ASYNCHRONOUS
Behaviour
Interface Binding Description

AMQP 1.0 content-type header used to specify media type values

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

The following section describes details how to subscribe and unsubscribe to this service.

Operations

At the moment subscribing or unsubscribing to this service is only possible by contacting the DWD Aviation Customer Service. Contact details are found in the general part of the service description.

Idempotent
NON_IDEMPOTENT
Synchronous
ASYNCHRONOUS
Behaviour
Interface Binding Description

AMQP 1.0 content-type header used to specify media type values

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

The ADT DNES is compliant to the Open Geospatial Consortium (OGC) Web Feature Service Temporality Extension (WFS-TE) specification, OGC 12-027r3 and the corresponding Web Feature Service (WFS) version 2.0.0 specification. For a machine- and human-readable interface description, please refer to the GetCapabilities.

Operations

A detailed description of supported operations is provided in the machine-readable WFSS capabilities document.

Idempotent
NON_IDEMPOTENT
Synchronous
ASYNCHRONOUS
Behaviour
Interface Binding Description

Both HTTP GET requests with key-value pairs as query parameters and HTTP POST requests with XML encoding of the requests, following the provisions in the WFS specification are supported.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

The interface is used to receive the data via WFS.

Operations

This is the connection between the service provider and the customer via WFS.

Addressable Resource

The necessary layer name will be provided after contacting the DWD aviation customer service together with the credentials for requestung the data.

Behaviour
Interface Binding Description

The user can specify the output format within the request.

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding

The complete API description is available on MetSafe user portal accessible through a Token.  An access Token can be requested at [email protected].

Operations
Behaviour
Interface Binding Description

OGC:WFS2.0.0

WFS documentation can be found at:
https://docs.geoserver.org/latest/en/user/services/wfs/index.html

Interface Provision Side
TI Primitive Message Exchange Pattern
Service Interface Binding
Network Interface Binding